FAQ

What are the 5 iron ores

The five main types of iron ore, classified by iron content and mineral composition, are *Magnetite* ((Fe_{3}O_{4}), $sim$72% Fe), *Hematite* ((Fe_{2}O_{3}), $sim$70% Fe), *Goethite* (63% Fe), *Limonite* (up to 60% Fe), and *Siderite* ($sim$48% Fe). These ores, ranging from dark grey tored, are primary sources for iron and steel production. 

Five Types of Iron Ore 

Magnetite: The highest quality ore, containing up to 72% iron, characterized by its dark grey to black color and strong magnetic properties.

 
Hematite: The most important industrial iron ore, featuring a lreddish-brown color, with high iron content (60-70%).

Goethite: A yellowish-brown iron oxide hydroxide mineral with an iron content of around 63%.

Limonite: A hydrated iron oxide (yellowish) with 40-60% iron content, often considered a lower-grade ore.
 

Siderite: An iron carbonate mineral containing around 48% iron. It is less desirable due to its lower grade and higher impurities. These minerals are often found in metamorphic rocks and are extracted globally to produce steel for construction and manufacturing. 

What are the 4 ways ores form?

Ore is formed one of four ways, either through igneous, sedimentary, metamorphic, or hydrothermal processes.

What are the forms in which iron ores are found?

Iron ore occurs most abundantly in the form of oxides. Other forms are carbonates, hydroxides, sulphides and silicates. It is also found in association with titanium dioxide.

What are four types of ores?

Ores are the minerals from which metal is conveniently and profitably extracted. There are mainly four kinds of ores like Ores Oxides; Ores Carbonate; Sulphide Ores; Ores Halides.

Physical/Commercial Forms of Extracted Ore

After extraction,  iron ore is processed into different physical forms for steel production:

Lump Ore: Direct-shipping ore (DSO) that is crushed and screened to a size (typically 6.3–31.5 mm) suitable for direct use in blast furnaces.

Fines: Smaller particles (0-8 mm) produced during mining that require agglomeration (sintering) before being used in a blast furnace.

Concentrates:Produced by grinding low-grade ore (like taconite) to remove silica and impurities, resulting in a high-grade powder.
Pellets:Fines or concentrates are mixed with binders and fired to create small, hard, uniform balls (9–13 mm) for high-efficiency ironmaking.

Sinter:A porous agglomerate formed by heating fines, flux, and coke to 1400 °C.

PLEASE NOTE: Iron ore rates vary based on grade, quantity, and delivery location. Please specify the grade, quantity, and delivery location, and we'll provide a quote accordingly.

 Payment terms: 100% payment against proforma invoice. We'll handle the rest.